 |
 |
BACK | INDEX |
|
4: PARTS LIST: "SPUNKY" Shaza Jane
|
| rev. 1 - 11/01 |
| rev. 2 - 10/02 |
| © 2001, 2002 Fred Nachbaur |
| (Parts with Mode part numbers available from your local Mode distributor.) |
| PART | DESCRIPTION | NOTES |
| C ------ | CAPACITORS | |
| C1, C2, C3 | 100 µF. 250 V electrolytic | mylar unless noted |
| C4 | 47 µF, 250V electrolytic | |
| C5, C6 | 100 µF 25V electrolytic | |
| C7 - C10 | 1 µF 25V electrolytic | |
| C11 | 0.047 µF 50V | |
| C12 | 100 pF 200V disc ceramic | |
| C13 | 4.7 µF 25V electrolytic | |
| C14 | 3.3 µF 25V electrolytic | |
| C15 | 1 µF 250V electrolytic | |
| C16 | 0.047 µF 200V | |
| C17 | 180 pF 200V disc ceramic | |
| C18, C22 | 0.01 µF 200V | |
| C19 | 56 pF 200V disc ceramic | |
| C20 | 150 pF 200V disc ceramic | |
| C21 | 0.022 µF 200V electrolytic | |
| C22 - C24 | 0.01 µF 200V | |
| C25 | 47 pF 200V disc ceramic | |
| C26 - C29 | 0.022 µF 200V electrolytic | |
| C30 - C33 | 27 pF 200V disc ceramic | |
| C34 | 0.47 µF 200V mylar or ceramic | |
| C35, C36 | 4.7 nF 400V | |
| D ------ | SEMICONDUCTOR DIODES | |
| D1-5 | 1N4004 silicon rectifiers | |
| D6 | 110V, 5W Zener diode | solder to PCB heatsink |
| J ------ | JACKS | |
| J1 | 1/4" mono phone jack w/ switch | Mode 24-681-0 |
| J2 | RCA chassis-mount jack | Mode 24-181-0 |
| J3 | 1/4" stereo phone jack w/ switch | Mode 24-697-0 |
| L ----- | NEON PILOT LAMP | |
| L1 | 125 VAC Red neon pilot | Mode 55-442-0 |
| R ----- | RESISTORS | |
| R1, R2 | 240 ohm, 10W | 1/4 5% unless noted |
| R3 | 22 ohm, 2 W | |
| R4 | 1K, 1 W | |
| R5 | 2.2K | |
| R6 - R9 | 50K trimpots | |
| R10, R19 | 3.3K | |
| R11-14, R33 | 220K | |
| R15 | 470K | |
| R16 | 200K | |
| R17 | 3K | |
| R18 | 680 ohm | |
| R20 | 75K | |
| R21 | 100K | |
| R22 | 100K audio taper pot | |
| R23 | 270K | |
| R24 | 2.7K | |
| R25 | 47K | |
| R26, R28/TD> | 18K | |
| R22 | 100K linear taper pot | |
| R30 | 1K | |
| R31 | 56K | |
| R32 | 680K | |
| R34, R35/TD> | 10K | |
| R36 - R39 | 10 ohm | |
| R40 | 2K 10W | |
| R41, R42 | 100 ohm | |
| R43 | 8.2 ohm, 10W | |
| SW ----- | SWITCHES | |
| SW-1 | SPST (power) part of R22 | or use Mode 42-230A-0 |
| SW-2 | SPST sub-mini toggle (compressor) | Mode 42-230A-0 |
| T ------ | TRANSFORMERS | |
| T1 | Power Transformer | See text |
| T2 | Bias Transformer | 12V at 50 mA or greater |
| T3 | Output Transformer | Hammond 125C or see text |
| V ------ | VACUUM TUBE (VALVES) | |
| V1 | 9JW8 | pentode/triode |
| V2 | 12AU7/ECC82 | twin medium-mu triode |
| V3 - V6 | 35C5 | beam pentodes |
| MECHANICAL AND OTHER PARTS |
| Steel or aluminum chassis (available from Hammond, etc.) |
| Grounded AC power cord and plug (Mode 31-031-0) |
| strain relief for power cord (Mode 34-633-0) |
| heat sink for R1, R2 (as from CPU fan) |
| 4 ea. 7-pin miniature chassis-mount tube socket |
| 2 ea. 9-pin miniature chassis-mount tube socket |
| sub-chassis as required for volume control |
| Knob(s) for volume control(s) (several types available from Mode) |
| mounting hardware (nuts, bolts, washers) |
| terminal strips and/or perf-board |
| hookup wire |
| shielded cable |
| cables to instrument and amplifier |
| enclosure, handle |
| rubber feet (Mode 54-875-0) |
| speaker (see text) |
| speaker terminals (e.g. Mode 58-098-0) |
|
|
BACK | INDEX |